You have no items in your shopping cart.

  • Zigbee
  • Globalstar
  • Sat Docks
  • GeoPro
  • In Flight Phones
  • SENA - Leading M2M Solution Provider
Previous | Next

LS100B HelloDevice Lite Single Device Server Board

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • LS100/110 series HelloDevice Lite application diagram
  • LS100B HelloDevice Lite Single Device Server Board

LS100B-G01 HelloDevice Lite serial device server board(Wt.100g)

Email to a Friend
OR

Quick Overview

LS100B-G01*
  • *This is an Embedded Board ONLY.
  • LS100B HelloDevice Lite Board serial device server that connects RS-232 based serial devices to the 10-Base-T Ethernet Network.
  • The LS110 serial device server supports advanced features such as telnet COM port control protocol support (RFC2217 compliant), and Built-in surge protection.
  • Details

    The LS100 is a cost-effective wired serial device server that connects RS-232 based serial devices to the 10-Base-T Ethernet Network.

    (The LS110 serial device server supports advanced features such as telnet COM port control protocol support (RFC2217 compliant), and Built-in surge protection.)

    "Whats in the Box?" LS100B-01

  • 1x LS100B HelloDevice Lite single device server board only


    • Connects legacy serial devices to 10Base-T Ethernet.

    • Supports RS232 based serial devices via DB9 serial port.

    • Serial data transfer rate up to 115Kbps.

    • Reliable TCP/IP protocol stack.

    • Low-price model for lowest transition cost.

    • Configuration via telnet or serial port.

    • Management software for configuration and administration.

    • LS110 : Surge protector included. 

    • (LS110 : Supports RFC 2217, Telnet COM Port Control Protocol.)

    Go(scroll down to) the Reference Table below.......





























































































    LS100 LS110
    Serial Interface Male DB9 serial port
    Serial speeds: 1200bps to 115Kbps
    Flow Control: Hardware RTS/CTS
    Signals:

    • LS100
      - RS232 : Rx, Tx, RTS, CTS, DTR, DSR, GND

    • LS110
      - RS232 : Rx, Tx, RTS, CTS, DTR, DSR, GND, DCD


    Network Interface 10 Base-T Ethernet with RJ45 Ethernet connector
    Supports static and dynamic IP address
    Protocols ARP, IP/ICMP
    TCP/IP
    Telnet
    DHCP client
    PPPoE
    ARP, IP/ICMP
    TCP/IP
    Telnet
    DHCP client
    DNS
    Serial Access port protocol : Raw TCP Serial Access port protocol : Telnet, TCP, UDP, RFC-2217
    Security User ID & Password User ID & Password, IP Address filtering.
    Management

    • Telnet

    • Serial console port

    • HelloDevice Manager


    Firmware - Upgrade using console and telnet
    Diagnostic LED

    • Ready

    • Link and Act for Ethernet

    • Serial Rx / Tx

    • Ready


    Power Supply voltage = 7.5V ~ 15V DC
    Supply current = 300mA @ 7.5V DC
    Supply voltage = 7.5V ~ 15V DC
    Supply current = 300mA @ 9V DC
    Environmental Operating temperature: 0°C to 50°C
    Storage temperature: -20°C to 66°C
    Humidity: 90% Non-condensing
    Physical Properties
    Dimension (LxWxH)
    100x 72 x 25 (mm)
    3.94 x 2.83 x 0.98 (in.)
    Weight: 240g
    MTBF 39.45 Years -
    Regulatory Approvals FCC Part 15 Subpart B, Class A
    EN61000-3-2, EN61000-3-3
    EN60950-1
    EN55022
    EN55024
    MIC
    Warranty 5-year Limited Warranty