You have no items in your shopping cart.

Previous | Next

HN-01-3500563-0001 Hughes 9502 M2M IP Terminal, IDU Indoor Unit

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • HN-01-3500563-0001 Hughes 9502 M2M IP Terminal, IDU Indoor Unit
  • 9502 M2M Front and Back view of interfaces and control features
  • Optional 9502 M2M Terminal Strap - NOT supplied in this pack
  • Optional 9502 M2M Terminal Strap Fitted - NOT supplied in this pack
  • 9502 M2M Terminal shown remotely installed within the NEMA 4x Enclosure

HN-01-3500563-0001 Hughes 9502 M2M IP Terminal, IDU Indoor Unit, Class 1, Division 2, Groups A,B,C,D and ATEX Group II, Category 3

Email to a Friend
OR

Quick Overview

HN-01-3500563-0001 Hughes 9502 M2M IP Terminal, IDU Indoor Unit
• Hughes 9502 M2M IP Terminal, IDU ONLY
This is the terminal Unit as supplied in the complete 9502 M2M Pack, part# HN-00-3500509-0001

Details

HN-01-3500563-0001 Hughes 9502 M2M IP Terminal, IDU Indoor Unit Hughes 9502 M2M IP Terminal Interfaces • Ethernet • USB • RS232 serial interface (DB9 male, DTE) to external NMEA 0183 based GNSS device (e.g., GLONASS receiver).This port cannot be used for serial data • SIM Card • TNC-Female type RF connector(for Cable to ODU) • DC input, 2-line power connector • Audio Jack, 3.5mm(for audio tone or voltage level to assist in ODU pointing) Operation Interface / LED • Function(User) Button • LED - Power • LED - BGAN Satellite Network • LED - GPS Satellite Mounting Profiles The IDU can be mounted using the:
  • IDU strap (P/N 3500617-0001) if desired Strap will require 4 each mounting bolts either M3.5 or 6/32” (not included). The Indoor unit (IDU) is housed inside building or NEMA 4x Enclosure / the remote terminal unit (RTU), NOT included. Optional Accessories - NOT included in this "IDU Terminal ONLY" pack
  • Part# HN-01-3500638-0001, ODU External Flat Panel Antenna
  • Part# HN-01-3500638-0001, RF Cable 10m(32.4ft) Antenna cable, terminated with N Connectors
  • Part# HN-01-3500634-0001, Adapter, TNC to N type (for connecting the RF Cable from ODU Antenna to the IDU Terminal)
  • Part# HN-01-3500617-0001, IDU Mounting Strap(requires 4 each mounting bolts either M3.5 or 6/32” NOT included)
  • Part# HN-01-3004066-002 ODU Fixed Mount
  • Part# HN-01-1022994-0022 ODU Azimuth Elevation Bracket
  • Extended warranty options This is the terminal Unit as supplied in the complete 9502 M2M Pack, part# HN-00-3500509-0001
  • What's in the Box? HN-01-3500563-0001
    • 1x Hughes 9502 M2M IP Terminal UNIT ONLY

    Optional Accessories - NOT included in this pack
  • Part# HN-01-3500638-0001, ODU External Flat Panel Antenna
  • Part# HN-01-3500638-0001, RF Cable 10m(32.4ft) Antenna cable, terminated with N Connectors
  • Part# HN-01-3500634-0001, Adapter, TNC to N type (for connecting the RF Cable from ODU Antenna to the IDU Terminal)
  • Part# HN-01-3500617-0001, IDU Mounting Strap(requires 4 each mounting bolts either M3.5 or 6/32” NOT included)
  • Part# HN-01-3004066-002 ODU Fixed Mount
  • Part# HN-01-1022994-0022 ODU Azimuth Elevation Bracket
  • Extended warranty options

    This is the terminal Unit as supplied in the complete 9502 M2M Pack, part# HN-00-3500509-0001
  • HN-01-3500563-0001
    9502 M2M IP Terminal UNIT ONLY
     No connection charge with BGAN M2M(normal BGAN charge is 100 Kbytes)
     Minimum CDRs only 1 Kbyte (normal BGAN charge is 10 Kbytes)
     No charge over-the-air modem software upgrades
     Exclusive airtime packages unique to the Hughes 9502
     Integrated IP Watchdog to ensure “always-on” network connectivity.
     No manual intervention required to recover from an outage
     Auto-on/auto-context activation automatically restores power and PDP connection to itself following loss of power and/or IP connection
     Remote control via SMS—remote management platform for command and control to the terminal using SMS, including configuration, debugging, and access to Web interface
     Ultra-low power consumption
     Transmit: < 20 W
     Narrow beam w/o transmit: 3 W
     Idle (regional beam): < 1 W
     Off (wake on packet): < 10 mW (@ 12 Vdc)
     Off (wake on packet): < 30 mW (@ 24 Vdc)
     Off (GPIO control): 0 W
     Relay mode passes WAN IP address to the connected RTU
     Security enhancements with extended layers of embedded security options
     Basic installation; no PC required
     Outdoor unit (ODU) can be pole mounted
     Indoor unit (IDU) is housed inside building or the remote terminal unit (RTU)
     Built-in GPS receiver
     Use of Internet Protocol (IP) via the BGAN satellite network
    Security
    o Ethernet MAC Filtering
    o Administration Password
    o SMS Control password
    o White List for SMS control
    o AT Command password lock
    o SIM Personalization: Phone-to-SIM, DP SIM Lock, SP SIM Lock
    Other Features:
    o Single external BGAN Satellite and GPS antenna connection
    o GPS module inside Indoor Unit
    o 3 status LEDs
    o Antenna pointing audio tone and voltage level indicator through audio jack
    o SIM/USIM Slot (behind SIM door)
    HN-01-3500563-0001
    9502 M2M IP Terminal UNIT ONLY
    Electrical
    Satellite Transmit Frequency: 1626.5–1660.5 MHz
    Satellite Receive Frequency: 1525–1559 MHz
    GPS Frequency: 1574.42–1576.42 MHz
    Input Voltage: +12 Vdc/+24 Vdc nominal
    Firmware Upgrades: Over the air or local
    Mechanical
    IDU Weight: 1.2 Kg (2.64 lbs)
    IDU Dimensions: 150 x 200 x 45mm
    Environmental
    Operating Temperature: -40° C to +75° C
    Storage Temperature: -55° C to +75° C
    Humidity: 95% RH at +40° C
    IDU Water and Dust: IP-40 Compliant
    Operation Interface / LED
    • Function(User) Button
    • LED - Power
    • LED - BGAN Satellite Network
    • LED - GPS Satellite
    Interfaces
     Ethernet connection (RJ45)
     USB 1.1 connection (USB Type-B) for PC to configure terminal
    (requires installation of Hughes USB driver, see www.bgan.hughes.com )
     TNC-Female type RF connector on IDU
     RS232 serial interface (DB9 male, DTE) to external NMEA 0183 based GNSS device (e.g., GLONASS receiver).This port cannot be used for serial data
     DC input, 2-line power connector
     Audio Jack, 3.5mm
     3.5 mm stereo audio jack for audio tone or voltage level to assist in ODU pointing
     USIM card slot behind SIM door

    9502 M2M(IDU) Mounting Profiles
    The IDU can be mounted using the:
  • IDU strap (P/N 3500617-0001) if desired Strap will require 4 each mounting bolts either M3.5 or 6/32” (not included).
    The Indoor unit (IDU) can be housed inside building or NEMA 4x Enclosure / the remote terminal unit (RTU), NOT included